SoftRouter One-Click
中文 Contact

sdwan routers · Desktop app for & Windows

Every soft router.
One window.

Find the routers on your network, open every admin page in one click, and change WiFi, firewall and firmware across all of them. No more memorising IPs, no more logging in again and again.

Get in touchSee what it does
  • Windows
  • sdwan
Illustration with sample data
Why

One router is easy. Ten is a chore.

Home, a shop, a few sites — every router has its own address, its own login and its own pile of pages.

  • BeforeA dozen IP addresses, and you check your notes every time.

    NowRouters are found automatically and listed as cards — which are up, and how fast, at a glance.

  • BeforeLogging into each admin page by hand, over and over.

    NowYour login is remembered. One click opens a page; “Open all” opens every page of a router.

  • BeforeChanging WiFi on each router by hand — miss one and they no longer match.

    NowRoll changes out to several routers at once, preview them first, and see the result per router.

  • Before如果是创建多wifi比较麻烦和选择不同节点的时候很麻烦

    Now我们的软件就可以直接在软件里面创建多wifi不用这么麻烦一键操作

  • Before外面的一些软路由没有可以创建真实mac地址对于如果是出口是虚拟地址对于弄项目肯定伪装不好

    Now我们现在可以真实下发真实几十万台路由的mac地址就是物理网卡唯一性这样的话对于弄项目伪装度更好不会泄露你所在地方

  • Before选择添加节点的时候进行分流你没有软件只能一个一个添加如果你节点比较多的情况下

    Now我们的软件可以支持多节点一键分流添加不用一个一个添加

  • Before一个软路由的时候你没有软件管理起来很麻烦，改密码和其他调节wifi参数和维护很麻烦

    Now我们现在还有可以链式代理很简单，管理软路由很简单

Features

What it does

A desktop app for your computer, built for routers running OpenWrt.

  • Discover

    Automatic discovery

    Scans your subnet, finds the routers on it and marks the main one. All 254 addresses in about 8 seconds.

  • Connect

    Four ways to connect

    Direct on the LAN, over a public address (DDNS), through a relay host, or via an SSH hop — whichever suits the site.

  • Link

    LAN and WAN paths

    Both paths are probed at once. Each card shows which is up and its latency in ms — or choose one yourself.

  • Login

    One click to the admin page

    Your login is remembered. “Open all” opens every page of a router at once, optionally as tabs in a single window.

  • WiFi

    Bulk WiFi setup

    Create WiFi networks on several routers at once and tune channel, width, transmit power and region together (please follow local regulations). Deleting a network also cleans up its interface, DHCP and firewall entries.

  • Network

    Interfaces and network options

    Add interfaces and change global network options; manage forwarding-acceleration options when Turbo ACC is installed on the router.

  • Firewall

    Firewall and access control

    Zone policies, port forwarding and custom rules. Key changes come with a countdown confirmation and roll back on their own if you don’t confirm.

  • Backup

    Backup and restore

    Back up a router’s configuration to your computer and restore it when needed; the router restarts on its own afterwards.

  • Firmware

    Firmware: verify, then flash

    Firmware is checked for model and integrity before anything is flashed — a mismatch is refused. Afterwards the app waits for the router to return and restores your access.

  • Batch

    Run in bulk, preview first

    Changes for many routers are laid out as one run sheet: see what will happen, start, then follow progress and results per router.

  • Assist

    Remote assistance setup

    Generate the configuration needed to help family or friends at another location (with their knowledge and consent).

Who

Who it’s for

  • Home labbers with several routers

    A main router, a side router, a few APs — and a wish for fewer clicks.

  • Guesthouses, shops, small chains

    One router per location, with WiFi and firewall settings that should all match.

  • Net cafés, studios, small-office admins

    Many devices and frequent changes — bulk actions and rollback matter.

  • The family IT person

    Help from afar: preview first, and roll back if something goes wrong.

Start

Up and running in four steps

  1. 1

    Get in touch for a redeem code

    Tell me how many routers you manage.

  2. 2

    Install the app

    The installer for Mac or Windows.

  3. 3

    Activate with your code

    Enter it the first time you open the app.

  4. 4

    Discover routers and start

    Click “Discover routers”, pick the ones you manage, and let the app do the rest.

FAQ

Questions

What kind of router do I need?

It is built for devices running OpenWrt with the LuCI web interface.

Which computers does it run on?

macOS and Windows.

Could it break my router?

Changes can be previewed first. Key firewall and network changes come with a countdown confirmation and roll back automatically if you don’t confirm, and firmware is checked for model before flashing. Back up important devices first.

Does it need an internet connection?

Licences are verified online with your redeem code, so the computer needs internet access while you use the app. After a long time offline it will ask you to reconnect.

What language is the app in?

The app’s interface is currently in Simplified Chinese.

How do I buy it?

Reach me through the contacts at the bottom of this page, tell me how many routers you manage, and I’ll send a quote and a redeem code.

Contact

Questions or a quote? Get in touch

Tell me how many routers you have and where you use them, and I’ll tell you if it fits.